K Phone 3 SPD SC6531 Read Flash and Format Done With Volcano Tool hard-reset

How to flash K phone 3 with Volcano Tool? the below is the way and complete process to flash Kphone3 using Volcano Tool. The phone has Spreadtrum SPD SC6531 CPU and can be flash with Volcano box. Before flash/format the phone take full flash file backup then select the flash file and format the phone, any software issue of the phone will be solved and work fine. To format and read flash of Karbonn Kphone3 see the below details.

Karbonn Kphone3 CPU Details:

  • CPU TYPE:SC6531 [65310001]
  • FLASH ID: 00C8006000160000
  • Flash Type: SF_GD25LQ32                
  • Size:0x400000(4MB)
K Phone 3 SPD SC6531 Format Success With Volcano Tool
KPhone 3 SPD SC6531 Read Flash Done With Volcano Tool

Karbonn Kphone3 Format Log:

Detection initiated…
  Vcc: null
  Gnd: 5
  Analyzing D+ and D-…
  D+ = 3, D- = 2
  Detection D+/D- with 1.11 seconds.
  Continue to detect BOOT pin…
  Found [SPD] USB device: SCI USB2Serial,(VID_1782&PID_4D00)
  BOOT(Pull Down) = 4
  Find USB device:SCI USB2Serial (COM34), (VID_1782&PID_4D00)
  Pinouts setting complete!

  Internal version: SPRD3
  Boot downloaded.
  Start boot please wait a moment….
  Spreadtrum Boot Block version 1.2
  CPU TYPE:SC6531 [65310001]
  FLASH ID: 00C8006000160000
  Flash Type: SF_GD25LQ32               
>>Set to Factory successfully.


Interested in Computer, Internet and Mobile, here is to share my knowledge with the Internet World. If you like my post then share it on Facebook, Twitter and Google Plus


One Response

  1. lela star
    lela star at |

    Thank you ever so for you blog post. Will read on…


Leave a Reply